NodeMcu ESP8266 ESP-12E WIFI Development Board
Item No.: ME245
• Wireless 802.11 b / g / n standard • Support STA / AP / STA + AP three operating modes • Built-in TCP / IP protocol stack to support multiple TCP Client
connections (5 MAX) • D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA • AD0: 1 channel ADC • Power input: 4.5V ~ 9V
(10VMAX), USB-powered • Current: continuous transmission: 70mA (200mA MAX), Standby: <200uA • Transfer rate: 110-460800bps
• Support UART / GPIO data communication interface • Remote firmware upgrade (OTA) • Support Smart Link Smart Networking
• Working temperature: -40 ℃ ~ + 125 ℃ • Drive Type: Dual high-power H-bridge driver
connections (5 MAX) • D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA • AD0: 1 channel ADC • Power input: 4.5V ~ 9V
(10VMAX), USB-powered • Current: continuous transmission: 70mA (200mA MAX), Standby: <200uA • Transfer rate: 110-460800bps
• Support UART / GPIO data communication interface • Remote firmware upgrade (OTA) • Support Smart Link Smart Networking
• Working temperature: -40 ℃ ~ + 125 ℃ • Drive Type: Dual high-power H-bridge driver
Comment
Recommended Products
-
Dual ultrasonic sensorItem No.: ST1099 -
37 in 1 Sensor Kit For ArduinoItem No.: ST1065 -
FTDI Basic Program Downloader USB to TTL FT232 for ArduinoItem No.: ST1125 -
Stepper Motor Controller ModuleItem No.: ST1112 -
NANO 3.0 Controller TerminalItem No.: EX015 -
RF Transceiver ModuleItem No.: ME019 -
L293D Servo and Motor Controller ModuleItem No.: ST1138 -
lithium battery charger boardItem No.: ME058 -
PIR Motion Detector ModuleItem No.: SE062 -
8×8 Dot matrix drive ModuleItem No.: ST1156 -
A4988 Stepper Motor Driver ModuleItem No.: 3DS051 -
Smart home kit based on IDUINOItem No.: KST036 -
Bluetooth transmission moduleItem No.: ME081 -
5V 2 Channel Relay Module ShieldItem No.: ME114 -
5V Relay BoardItem No.: ST1080 -
5V 8 Channel Relay Module Board for ArduinoItem No.: ME115