Bluetooth Bee HC-05 Master/ Slave Module
Item No.: AD100
Bluetooth Bee is designed for transparent wireless serial connection setup. This is a fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate) 3Mbps
modulation with complete 2.4GHz radio transceiver. It uses CSR Bluecore4-external single chip Bluetooth system with CMOS technology and with AFH
(Adaptive Frequency Hopping). It can be configured to Master, Slave or Loopback three different modes and it will connect to or be connected by other
devices that support SPP protocol per configuration, and it is a suitable substitute for most applications.
modulation with complete 2.4GHz radio transceiver. It uses CSR Bluecore4-external single chip Bluetooth system with CMOS technology and with AFH
(Adaptive Frequency Hopping). It can be configured to Master, Slave or Loopback three different modes and it will connect to or be connected by other
devices that support SPP protocol per configuration, and it is a suitable substitute for most applications.
Comment
Recommended Products
-
Dual ultrasonic sensorItem No.: ST1099 -
37 in 1 Sensor Kit For ArduinoItem No.: ST1065 -
FTDI Basic Program Downloader USB to TTL FT232 for ArduinoItem No.: ST1125 -
Stepper Motor Controller ModuleItem No.: ST1112 -
NANO 3.0 Controller TerminalItem No.: EX015 -
RF Transceiver ModuleItem No.: ME019 -
L293D Servo and Motor Controller ModuleItem No.: ST1138 -
lithium battery charger boardItem No.: ME058 -
PIR Motion Detector ModuleItem No.: SE062 -
8×8 Dot matrix drive ModuleItem No.: ST1156 -
A4988 Stepper Motor Driver ModuleItem No.: 3DS051 -
Smart home kit based on IDUINOItem No.: KST036 -
Bluetooth transmission moduleItem No.: ME081 -
5V 2 Channel Relay Module ShieldItem No.: ME114 -
5V Relay BoardItem No.: ST1080 -
5V 8 Channel Relay Module Board for ArduinoItem No.: ME115