INA219 I2C Bi-directional Current / Power Monitor Sensor Module
Item No.: ME472
Feature:
Programmable calibration register can be read in units of ampere
direct current, and read the power in watts.
Up to 128 samples can be averaged to achieve filtering in noisy
environments.
I2C interface has a timeout setting, not only to prevent bus lock,
but also provides high-speed mode, to meet the communication
requirements of up to 3.4 MHz.
All properties INA219 are software programmable to support.
A single power supply, the operating voltage of between
+3.0 to + 5.5V
Programmable calibration register can be read in units of ampere
direct current, and read the power in watts.
Up to 128 samples can be averaged to achieve filtering in noisy
environments.
I2C interface has a timeout setting, not only to prevent bus lock,
but also provides high-speed mode, to meet the communication
requirements of up to 3.4 MHz.
All properties INA219 are software programmable to support.
A single power supply, the operating voltage of between
+3.0 to + 5.5V
Comment
Recommended Products
-
Dual ultrasonic sensorItem No.: ST1099 -
37 in 1 Sensor Kit For ArduinoItem No.: ST1065 -
FTDI Basic Program Downloader USB to TTL FT232 for ArduinoItem No.: ST1125 -
Stepper Motor Controller ModuleItem No.: ST1112 -
NANO 3.0 Controller TerminalItem No.: EX015 -
RF Transceiver ModuleItem No.: ME019 -
L293D Servo and Motor Controller ModuleItem No.: ST1138 -
lithium battery charger boardItem No.: ME058 -
PIR Motion Detector ModuleItem No.: SE062 -
8×8 Dot matrix drive ModuleItem No.: ST1156 -
A4988 Stepper Motor Driver ModuleItem No.: 3DS051 -
Smart home kit based on IDUINOItem No.: KST036 -
Bluetooth transmission moduleItem No.: ME081 -
5V 2 Channel Relay Module ShieldItem No.: ME114 -
5V Relay BoardItem No.: ST1080 -
5V 8 Channel Relay Module Board for ArduinoItem No.: ME115