Nokia 5110 LCD(GREEN screen)module
Item No.:
Nokia5110 LCD is Nokia's second-hand disassemble screen. The LCD sold by us are carefully selected , which are all in wonderful condition and of high quality.
The bottom plate is designed by us. The four corners all have locating hole, providing upper and lower ports on both row at the same time, arrangement is as follow:
1 RST - reset
2 CE -- CS
3 DC - Data / instruction selection
4 DIN - serial data line
5 CLK - serial clock line
6 VCC - power input (3.3V and 5V have been tested ok)
7 BL - backlight control terminal
8 GND - ground wire
Interface is serial SPI interface
The bottom plate is designed by us. The four corners all have locating hole, providing upper and lower ports on both row at the same time, arrangement is as follow:
1 RST - reset
2 CE -- CS
3 DC - Data / instruction selection
4 DIN - serial data line
5 CLK - serial clock line
6 VCC - power input (3.3V and 5V have been tested ok)
7 BL - backlight control terminal
8 GND - ground wire
Interface is serial SPI interface
Comment
Recommended Products
-
Dual ultrasonic sensorItem No.: ST1099 -
37 in 1 Sensor Kit For ArduinoItem No.: ST1065 -
FTDI Basic Program Downloader USB to TTL FT232 for ArduinoItem No.: ST1125 -
Stepper Motor Controller ModuleItem No.: ST1112 -
NANO 3.0 Controller TerminalItem No.: EX015 -
RF Transceiver ModuleItem No.: ME019 -
L293D Servo and Motor Controller ModuleItem No.: ST1138 -
lithium battery charger boardItem No.: ME058 -
PIR Motion Detector ModuleItem No.: SE062 -
8×8 Dot matrix drive ModuleItem No.: ST1156 -
A4988 Stepper Motor Driver ModuleItem No.: 3DS051 -
Smart home kit based on IDUINOItem No.: KST036 -
Bluetooth transmission moduleItem No.: ME081 -
5V 2 Channel Relay Module ShieldItem No.: ME114 -
5V Relay BoardItem No.: ST1080 -
5V 8 Channel Relay Module Board for ArduinoItem No.: ME115